|
|
|
|
|
Netting Cable
Our Price: $1.50
|
Side Wall Net
Our Price: $1.92
|
Replacement Rope, 9mm Bright (specify length needed)
Our Price: $2.00
|
|
|
|
|
Ό coated aircraft cable 7 x 19 strand stainless steel. Installed along edge
of climbing and barrier nets to hold nets in place. Must be secured with cable
clamps and thimbles on each end.
* Odering is done by liner foot.
|
Ύ-R - #96 three-strand twisted twine - knotted netting - 1 3/4" mesh -
U.V. latex treated black. Breaking strength of 641lbs (Per ISO method 1806).
Netting will be rope bound with a 3/8 dia. black hollow-braid rope border.
Manufactured to meet new 2009 - ASTM- F2375 09 for use as a Class 1 or Class
2 barrier net.
* Product is ordered by the square foot. After ordering a representative will be calling you to get your exact measurements.
For questions or custom size qutoes call 303-539-8574.
|
Replaces worn or damaged rope for Pull Rope Interactives.
|
|
|
|
|
|
|
|
Thimble
Our Price: $2.50
|
Pull Rope Valve Stem Replacement Spring
Our Price: $2.50
|
Cable Clamps
Our Price: $4.50
|
|
|
|
|
Thimble Ό Heavy Duty Stainless Steel (1ea. Required per cable termination)
to prevent excess wear and to extend cable life.
|
Replaces internal Spring of Pull Rope Valve which commonly wears out.
|
Ό cable clamps stainless steel (3ea. recommended per cable
end) along with stainless steel thimble.
|
|
|
|
|
|
|
|
3" Rubber Gasket
Our Price: $5.50
|
4" Rubber Gasket
Our Price: $7.50
|
1/2" SS Pipe Plug
Our Price: $8.00
|
|
|
|
|
|
Used throughout structures to maintain a water tight seal between two flanges or other pipe connections. (1/8" Thick)
|
Used throughout structures to maintain a water tight seal between two flanges or other pipe connections. (1/8" Thick)
|
Found on bottom portions of structure Stand Pipes. Used for draining residual water for winterization purposes.
|
|
|
|
|
|
|
|
6" Rubber Gasket
Our Price: $10.50
|
Sikaflex
Our Price: $12.00
|
Water Blaster Leather Piston Rings (2- Required per Blaster)
Our Price: $15.00
|
|
|
|
|
|
Used throughout structures to maintain a water tight seal between two flanges or other pipe connections. (1/8" Thick)
|
Durable caulking used to seal between slide joints and other areas of water structures.
|
Found on the shaft of the plunger for the Water Blaster. Price is per one each.
|
|
|
|
|
|
|
|
Climbing Net
Our Price: $18.46
|
Hose Jet Assembly, 18" length
Our Price: $20.00
|
Web Netting
Our Price: $20.76
|
|
|
|
|
Rope Net - 5/8 dia. Polyester white, three strand twisted rope custom made
with 3 openings. Net also has 1 Ύ safety debris net laced
to the underside for added protection and longevity. Net is manufactured to
meet new 2009 ASTM Standard- F2375 09 for use as a climb net.
* Product is ordered by the square foot. After ordering a representative will be calling you to get your exact measurements.
For questions or custom size qutoes call 303-539-8574.
|
|
Web Net 2 black polyester webbing custom formed into a tunnel net with 2 x
2 mesh openings. Webbing is crisscrossed in each direction for added strength
and box stitched at every intersection. Tunnel will have a 5/8 dia. polyester rope
looped through web ends for easy attachment to existing structure. Net also has
#K96T-1 Ύ-R 1 Ύ safety debris net laced to the underside for added protection
and longevity. Manufactured to meet new 2009 - ASTM- F2375 09 for use as a web climbing net
* Product is ordered by the square foot. After ordering a representative will be calling you to get your exact measurements.
For questions or custom size qutoes call 303-539-8574.
|
|
|
|
|
|
|
|
Water Blaster, UHMW Piston
Our Price: $25.00
|
HydroBlaster Bearing
Our Price: $30.00
|
Twine, #36 (Approx 540' per roll)
Our Price: $33.00
|
|
|
|
|
|
Found on the shaft of the plunger used in the Water Blaster.
|
Bearing for swivel mount on HydroBlaster
|
Used in repair of nets and climbing ropes found throughout water structures.
|
|
|
|
|
|
|
|
HydroBlaster Supply Hose
Our Price: $35.00
|
HydroBlaster Valve
Our Price: $40.00
|
WaterBlaster Supply Hose
Our Price: $40.00
|
|
|
|
|
|
Used to replace damaged, cracked or leaking supply hoses for the Hydro Blaster. Length of hose is approx 18"
|
This valve is found inside the HydroBlaster and has a custom spring to allow for easy functionality by children.
|
Used to replace damaged, cracked or leaking supply hoses for the WaterBlaster. Length of hose is approx 22"
|
|
|
|
|
|
|
|
Water Blaster, Seal Guide (2-Required per Blaster)
Our Price: $45.00
|
Throttle Valve Safety Caps, 2" & 3", PVC
Our Price: $45.00
|
Throttle Valve Safety Caps, 4", PVC
Our Price: $45.00
|
|
|
|
|
|
Found on the shaft of the plunger for WaterBlasters.
|
Covers shaft of valve when not in use or to lock the valve in desired positions.
|
Covers shaft of valve when not in use or to lock the valve in desired positions.
|
|
|
|
|
|
|
|
Throttle Valve Safety Caps, 6", PVC
Our Price: $45.00
|
Throttle Valve Safety Caps, (new style), PVC
Our Price: $45.00
|
Sit Down Bar for Poly Slide
Our Price: $55.00
|
|
|
|
|
|
Covers shaft of valve when not in use or to lock the valve in desired positions.
|
Covers shaft of valve when not in use or to lock the valve in desired positions. This version is used on structures with the new style butterfly valves which have the square output shaft. The 4 bolt connection flange on the valve will be square, unlike the old style valves which are round flanges.
|
|
|
|
|
|
|
|
|
Valve Shells, 6", PVC
Our Price: $60.00
|
Valve Shells, 4", PVC
Our Price: $60.00
|
Valve Shells, 3", PVC
Our Price: $60.00
|
|
|
|
|
|
Covers butterfly valve to prevent injury.
|
Covers butterfly valves to prevent injury.
|
Covers butterfly valve to prevent injury.
|
|
|
